Job Board - Manufacturing

Production Supervisor - ref.21328KL

Our client, a food product manufacturer, is seeking a Production Supervisor.Under the plant manager's responsibility, the Production Supervisor will:
• Oversee 20 to 25 production employees. Achieve manufacturing staff results by communicating job expectations, planning, monitoring job results, coaching, counseling and disciplining employees, etc.;
• Maintain staff by recruiting, selecting, orienting and training employees;
• Maintain work flow by monitoring process steps, setting processing variables, observing control points and equipment, monitoring personnel and resources, implementing cost reductions, developing reporting procedures and systems;
• Fulfill production program, establish priorities, monitor progress, update schedules, resolve problems;
• Ensure operation of equipment by calling for repairs, evaluating new equipment and techniques;
• Work with RD to launch new products.
Requirements:
• Degree in Mechanical or Electrical Engineering, Food Science, Microbiology, B.Sc. or related fields;
• 5 to 10 years of experience in production in the food industry;
• Previous experience as a production supervisor;
• Knowledge of HACCP, GMP and SQF;
• Good understanding of HR practices, Health and Safety, etc.;
• Able to coach employees;
• Bilingual (spoken and written); good communication skills in both languages.
Location: Lachine.
Salary: $60K + fringe benefits.

Production Technician (Microvellum) - ref.21333IG

Our client, an architectural cabinetmaker, is currently looking for a Production Technician using Microvellum.
• Review and correct, if necessary, plans/drawings on Microvellum;
• Perform computerized production start-up;
• Draft program and verify drawings;
• Order various supplies and prepare the material requisitions;
• Perform CNC programming;
• Provide a list of parts requiring subcontracting if necessary;
• Modify AutoCad drawing files to make them usable for production;
• Validate workshop plans;
• Ensuring continuous process improvement;
• Assist workshop staff during production during difficulties.
Requirements:
• DEC in Industrial Engineering, Mechanical Engineering or Manufacturing Production or equivalent;
• 3 to 5 years experience in production in cabinetmaking;
• Experience in architectural cabinetry for the residential sector;
• Experience in 3D programming;
• Excellent knowledge of AutoCad;
• Knowledge of Microvellum;
• Bilingual.
Location: Lower Laurentians.
Salary: $37K to $50K depending on experience + fringe benefits.

Assembler/Cabler - ref.21325SB

Our client specializes in the development, manufacture and maintenance of state-of-the-art products for aviation, maritime and land markets.
• Perform a variety of tasks on electronic assemblies, including welding, desoldering, wiring and replacing electronic components and subassemblies;
• Conduct a visual inspection to ensure that the manufacturing criteria are met;
• With minimal supervision, perform the assembly and assembly of electronic components and subassemblies.
Requirements:
• Degree from the École des métiers de l'aérospatiale or wiring/assembly training;
• 1 to 5 years of experience as an assembler/welder;
• Attended IPC J-STD-001C welding training;
• Skilled in using assembly and welding tools for electronic components;
• Skilled in using computer tools (Office Suite);
• Able to read electronic diagrams (an asset);
• French, English is an asset.
Location: Ville St-Laurent.
Salary: $33K to $42K depending on experience + fringe benefits.

Electrical Designer - ref.21332IG

Our client is a well known and growing company specialized in the design, manufacture and assembly of CNC machine tools.
• Design machines according to the business specifications and mechanical department design;
• Define specifications of subassemblies, communicate with subcontractors, produce overall assembly and detail plans;
• Produce and maintain schemas and equipment lists of power and command machine circuits;
• Schematics: distribution and control;
• Calculation: low voltage distribution for operation;
• Support internal clients;
• Respect schedules and budgets.
Requirements:
• DEC in électrotechnique or equivalent;
• 3 to 5 years electrical design experience;
• Software: AutoCad, MS Office; Windchill (an asset);
• Understanding of automation;
• Understanding of standards: Canadian or US Codes; European standards an asset;
• Functional French / English.
Location: Granby Region.
Salary: $45K to $55K depending on experience + very competitive benefits.

Electrotechnician - ref.21315IG

Our client, a renowned recreational equipment manufacturer, is looking for an Electrical Technician for the evening, night or weekend shift.
• Preventative and curative maintenance of production equipment such as: conveyors, assembly lines, presses, etc.;
• Troubleshooting equipment for electric and electronic problems;
• Participate in the installation, design or modification (electrical or electronic) of new equipment;
• PLC programming under Allen Bradley or Siemens.
Requirements:
• AEC or DEC in Electronics;
• C License hors construction (or in the process of obtaining);
• 3 to 5 years of experience in troubleshooting automated equipment;
• Knowledge of programming languages Allen Bradley and Siemens.
Location: Estrie Region.
Status: TEMPORARY position, 3 months, possibility of permanence. Evening 15:30 to 00:00, night 00:00 to 06:00 (30 hours worked, paid 37.5 hours) or weekend, Friday, Saturday and Sunday day (30 hours worked, paid 37.5 hours) to choose from or according to availability.
Salary: $24 to $32/hour depending on experience + shift premium, ($1.00/hr evening and $1.50/hr night). Possibility of per diem for candidates living farther away who are willing to travel for a short time.

Mecanical Design Technician (Creo) - ref.21293IG

Our client, a well known manufacturing company, is looking for a Mechanical Designer.
• Design and draft mechanical systems and subsystems;
• Establish tolerances, materials, surface finish of parts and assemblies during the design process;
• Develop the parts and/or options nomenclature for new assemblies;
• Monitor prototype manufacturing and correct documentation as needed;
• Technical support to production and suppliers when manufacturing new assembly parts.
Requirements:
• DEC in Mechanical Engineering or equivalent;
• 5 to 8 years in mechanical design;
• Knowledge of PTC Creo software (or other 3d design software);
• Knowledge of a manufacturing system such as Oracle (an asset);
• French, English is an asset.
Location: South Shore.
Salary: $45K to $55K depending on experience + fringe benefits.

Electrical Design Technician - ref.21292IG

Our client, a well known manufacturing company, is looking for an Electrical Designer.
• Design and draw electrical systems and subsystems;
• Peform impact assessments of changes to systems or harnesses and their effects on schematics;
• Develop drawings and all required documents;
• Monitor manufacturing of prototypes to ensure accuracy of drawings, nomenclature and assembly sequence;
• Assist the team of assemblers with assembling electrical panels of prototypes in order to correct documentation as needed;
• Technical support to production and suppliers when manufacturing new assemblies.
Requirements:
• DEC in Industrial Electronics, Industrial Engineering or Aerospace Engineering or Bachelor's in Electrical Engineering;
• 1 to 2 years experience in electrical design;
• Familiar with AutoCad;
• Knowledge of manufacturing systems such as Oracle (an asset);
• Bilingual.
Location: South Shore.
Salary: $45K to $55K depending on experience + fringe benefits.

Production Supervisor - ref.21260KL

Our client has a dynamic work environment to assemble heavy equipment and machine sub-assemblies.
The Production Supervisor will be primarily responsible for:
• Monitor production operations, inventory levels, line downtime, etc.;
• Observe production activities and ensure operators conform to production and quality standards;
• Assess product quality to ensure work stations are running properly and materials are being used appropriately;
• Plan and establish work schedules, assignments, and production sequences to meetproduction goals;
• Review production schedules to determine work sequences and coordinate with the materialsdepartment;
• Prepare reports regarding product issues;
• Assist with mediating issues and reprimandi employees if necessary;
• Resolve team issues and work with employees to assist in problem resolution.
Requirements:
• DEC and/or related experience or engineering background;
• 3+ years of pertinent experience in a manufacturing environment;
• Knowledge of manufacturing processes and systems;
• Assembly or mechanical experience preferred;
• Strong interpersonal and organizational skills;
• Excellent communication skills in English and French.
Location: Repentigny.
Salary: $52k to $55K+ depending on experience.

Production Test Specialist - ref.21273SB

The Production Test Specialist will design, implement, document and deploy the test sequencing and tools required to detect electronic product defects during new product introduction. This includes all software and material requirements for test systems destined for deployment in the production department and at subcontractor sites.
• Review and understand the electronic product design in order to develop and implement a product test plan validating all product functionality;
• Assess testability of the product and work with various project design teams ensuring that the test system design is easily integrated in the production process;
• Manage the design and assembly requirements of the test solution including test architecture and software, test system material requirements and associated test tools and fixtures;
• Develop the test software architecture and code and manage the review process to ensure code integrity and optimization according to the test plan;
• Manage test system deployment to production or sub-contractor production environments including operator-technician training;
• Manage all test system material and/or test software upgrades and maintenance on in-house or external test units.
Requirements:
• Bachelor's in Electrical/Electronics Engineering;
• 2 to 5 year experience in test engineering for electronic products;
• Excellent knowledge of C#, C++, Python programming languages (Microsoft Visual Studio);
• Electronics knowledge : able to read circuit schematics and electronic component specifications;
• Bilingual (functional)..
Location: Ville St-Laurent.
Salary: $60K to $75K depending on experience + fringe benefits.

Estimator - ref.21263IG

Our client, a well-established furniture manufacturer, is looking for an Estimator to join their team. Reporting to the Chief Estimator:
• Read plans and specifications (Solidworks and AutoCad);
• Prepare materials list for each project;
• Prepare estimates based on potential contracts, drawings and specifications;
• Perform cost, expense and forecast calculations;
• Solicit bids from subcontractors;
• Assist the Project Manager.
Requirements:
• Degree in Mechanical or Civil Engineering is an asset;
• 1 to 5 years experience in a similar position;
• Experience in manufacturing furniture or store displays;
• Good knowledge of metalworking or woodworking processes;
• Good knowledge of software (Word, Excel, ERP)
• Bilingual.
Location: Montreal East.
Salary: $40K to $50K depending on experience + fringe benefits.

Production Operator (Pharmaceutical) - ref.21187IG

Our client, well established in the pharmaceutical industry, is looking for a Production (Compression) Operator.
• Measure, weigh and load ingredients according to production formulae;
• Operate production equipment;
• Verify and sample products during production process;
• Mount, dismantle and clean different equipment;
• Compress, encapsulate and print tablets;
• Complete required documentation;
• Participate in the validation of equipment and processes.
Requirements:
• AEC in Pharmaceutical Production an asset;
• 5 to 8 years experience in pharmaceutical manufacturing;
• Very good written and spoken French and functional English.
Location: North Shore.
Salary: $45K to $50K depending on experience + fringe benefits.

Over 35,000 CVs of experienced technical staff on file including engineers, software developers, analysts, drafters, managers, technical writers, planners, designers, technologists, buyers, technicians and tradespersons, as well as senior management.

© Techaid Inc.
5165 Queen Mary Road, #401
Montreal (QC) H3W 1X7
Tel: 514-482-6790