Job Board - Skilled Trades

Electromechanic (Day Shift) - ref.21384IG

Our client, a growing manufacturing company, is looking for an Electromechanic for the day shift.
• Preventive and corrective maintenance of production equipment at the mechanical, electrical and electronic level;
• Calibration of equipment when necessary;
• Participate in problem solving and continuous improvement;
• Test equipment to ensure performance.
Requirements:
• DEP in Electromechanics;
• 3 to 5 years of relevant experience;
• Very good spoken and written French. English an asset.
Location: Boucherville.
Salary: $20 to $22/hour depending on experience + fringe benefits.

Electromechanic (Day Shift) - ref.21192KL

Our client is an innovative custom machinery company with new technologies to automate the preparation of orders in distribution centers. They are looking for an Electromechanic to work on automated equipment designed and manufactured by the company. You will join a team of technicians maintaining a high speed automated order picking system. The work location is at a customer's facility in Montreal East.
• Perform preventive maintenance tasks according to program set out in CMMS.
• Perform repairs as needed
• Support diagnosis and resolution of machine issues
• Record activities in CMMS software.
• Propose improvements to the maintenance plan with a view to continuous improvement
• During production, perform diagnosis and repairs, supporting all the equipment that is a part of the automated system.
Requirements:
• DEC or DEP Electromechanics of Automated Systems;
• At least two (2) years of experience;
• Eligible to pass the RCA restreint en connexion d'appareillage certificate exam without further training;
• Bilingual.
Location: Montreal East.
Salary: $20 to $22/hour.

Cabler/Team Lead - ref.21348KL

Our client is a leader in industrial automation. You will assume all responsibilities related to the production of projects in the factory
• Plan and produce projects (assembly and wiring of control panels), with a very high level of quality;
• Keep the plant clean and orderly;
• Ensure that tools and production equipment are well maintained and functional;
• Participate in the transfer of information to project managers;
• Update the production schedule with the production manager.
Requirements:
• DEP in Electrodynamics or equivalent;
• 5 years of experience in the assembly and wiring of control panels with PLC, HMI, starters, etc.;
• Minimum of 2 years experience in factory management;
• Read and understand electrical control drawings;
• Knowledge of materials and equipment in control and automation, CSA and UL standards;
• Bilingual.
Location: South Shore.
Salary: $41K à $48K depending on experience.

Injection Mold Fitter (Nights) - ref.21350IG

Our client, a plastic injection company, is looking for a mold fitter, tooling and injection equipment on night shift.
• Determine tasks to be performed according to the production schedule and work duration;
• Maintenance of tools and equipment needed for production;
• Check the compatibility of the mold, nozzle and machine;
• Adapt the mold to the planned production by changing the inserts and fixing the mold on the machine;
• Connect ejection systems, water supply systems, hydraulic, electrical and pneumatic systems;
• Install peripheral equipment;
• Adjust the press and start production;
• Set molding parameters;
• Verify conformance of the finished product;
• Perform production shutdowns and disassembly of molds and peripherals.
Requirements:
• DEP in Adjustment of Molding Machines or DEC in Plastics Processing;
• 3 years of experience in plastic injection molding;
• French.
Location: Montreal East.
Salary: $40K to $54K depending on experience + fringe benefits.

Electromechanic - ref.21311IG

Our client, a manufacturer of polymer construction products, is looking for an Electromechanic to work rotating shifts.
• Electrical, mechanical, hydraulic and compressed air troubleshooting and repairs on production equipment and building;
• Updating and improving equipment performance;
• Preventive maintenance;
• Monitor maintenance using planning software;
• Maintain inventory of spare parts
• Troubleshooting of manufactured products and production support.
Requirements:
• DEP or DEC in Electromechanics;
• 3 years experience in maintenance of industrial machines (preferably in plastics industry);
• Welding experience, handling of forklifts and machining;
• French.
Status: Permanent position on12 hour shifts, 2 weeks of day and 2 weeks of night.
Location: West Island.
Salary: $48K to $53K depending on experience + fringe benefits.

Machinist (Gear Cutting) - ref.21334KL

The successful candidate will have the ability to set up and operate gear cutting machines (CNC Shaping, CNC Hob and Spiral Bevel Grinding/Cutting machines), all to close tolerances.
• Set up and operate two or more types of gear-cutting and finishing machines, such as gear shapers, hobs and spiral bevel grinder/generators, to machine spline or gear teeth on metal blanks;
• Read process sketches to determine gear dimensions, tooling requirements and machine settings;
• Verify conformance using micrometers, gear measuring wires, master gears, and special gear inspection equipment;
• Maintain, repair and calibrate precision measuring instruments such as dial indicators, fixed gauges, height gauges and other measuring devices;
• Report deviations from specifications and tolerances to supervisor.
Requirements:
• Completion of a four-year apprenticeship program or five years of pertinent work experience;
• Experience as a machinist in the aviation industry;
• Excellent blueprint reading ability including thorough understanding of geometry, dimensions and tolerancing;
• Fully capable of all aspects of CNC cylindrical grinding;
• Fully capable of machine cycle and tool optimization;
• Available to work rotating shifts and/or night shift and work weekly overtime;
• English.
Location: Windsor, ONTARIO.
Salary: $26/hour + fringe benefits.

Industrial Mechanic - ref.21324IG

Our client, a company specializing in metal extrusion, is looking for an Industrial Mechanic working night shift from March through October and then evening shift for the rest of the year.
• Mechanical maintenance of the factory;
• In charge of preventive maintenance, troubleshooting and repair of equipment;
• Machining of parts as needed for repairs on a conventional lathe;
• TIG, MIG and arc welding;
• Maintenance of mechanical, hydraulic and pneumatic components of equipment (pumps, conveyors, sieves, etc.);
• Read plans, diagrams and schemas to determine how to proceed.
Requirements:
• DEP in Industrial Maintenance or equivalent;
• 3 to 5 years of industry experience;
• Knowledge of parts machining and welding;
• French well spoken and written and functional English.
Schedule: 11pm to 7am Sunday to Friday (March through October), 3pm to 11pm Monday to Friday (rest of the year).
Location: Laval.
Salary: $25+/hour depending on experience plus shift bonus ($.65/hr evening, or $.85/hr night) + fringe benefits.

CNC Machinist - ref.21300IG

Our client, a manufacturer of complex, customized mechanical-welded assemblies, is looking for a CNC Machinist.
• Machining on boring machines and large scale vertical CNC lathes;
• Mount and adjust machining equipment to manufacture complex and various parts;
• Position and anchor heavy parts on the machining table with precision;
• Interpret sketches and drawings;
• CNC programming for machining;
• Perform minor repairs on your own machine and assist the maintenance worker;
• Perform geometric and trigonometric calculations.
Requirements:
• DEP in machining techniques and ASP in numerical programming;
• 3 to 5 years of experience;
Status: 2 permanent positions, one day shift and one evening shift.
Location: South Shore.
Salary: $41K to $55K depending on experience + fringe benefits.

Industrial Mechanic - ref.21296KL

Our client, a leader in the food processing industry, is seeking an Industrial Mechanic.
• Ensure the proper functioning and preventive maintenance of systems and equipment.
Requirements:
• DEP in Industrial Mechanics or Electromechanics;
• Relevant experience in preventive maintenance (fitting),pneumatic, hydraulic and general maintenance;
• French.
Status: Permanent postion. 40 hours/week. (rotating shifts - day/evening/night).
Location: Acton Vale region.
Salary: $18.22/hour (.45/hr night premium).

Line Mechanic (Night Shift) - ref.21275SB

Our client, a well known pharmaceutical company, is looking for a Line Mechanic for the night shift;
• Carry out the tasks of operator on your assigned job, ie operate, clean, feed, repair the machine;
• Locate/determine the cause of mechanical and electrical failures and diagnose;
• Troubleshooting - detect, analyze and repair mechanical and electrical anomalies on production equipment;
• Monitor equipment after interventions and ensure product quality at all times;
• Communicate any current or future work that could cause production interruptions with the senior operator or supervisor;
• Provide solutions and participate in the improvement of filling and packaging line machinery;
• Carry out preventive maintenance work within set standards and deadlines;
• Carry out pre-operational tests and inspections after an intervention;
• Actively participate in the training of new employees and the exchange of information.
Requirements:
• DEC or DEP in Electromechanics, Mechanics or equivalent;
• 2 - 5 years of relevant experience, (industrial experience is an asset);
• Demonstrated mechanical aptitude in the repair and diagnosis of anomalies in electrical, mechanical and pneumatic equipment;
• Basic computer knowledge;
• Able to function effectively in a team work environment with little supervision;
• French. English is an asset.
Location: West Island.
Salary: $22 to $25/hr depending on experience + night shift bonus $1.20/hr + fringe benefits.

Mechanic/Assembler - ref.21255KL

Our customer requires a Mechanic/Assembler to assemble the mechanical and hydraulic components of heavy mining equipment. TEMPORARY position.
Requirements:
• DEP in Mechanics;
• 1 to 2 years pertinent experience;
• Welding experience is an asset;
• You must provide your own tool set;
• Functional French or English.
Location: Repentigny.
Status: TEMPORARY position, 2 to 3 months.
Salary: $20/hour.

Industrial Mechanic - ref.21266IG

Our client, specialized in packaging products, is looking for an Industrial Mechanic.
• Mechanical maintenance of the factory;
• In charge of preventive maintenance, troubleshooting and repair of equipment;
• Machining of parts as needed for repairs;
• Welding;
• Maintenance of the equipment mechanical, hydraulic and pneumatic components (pumps, conveyors, sifters, etc.);
• Safely use lifting tools, forklift trucks;
• Read plans, diagrams and schemas to determine how to proceed.
Requirements:
• DEP in Industrial Maintenance or equivalent;
• 3 to 5 years of industry experience;
• Knowledge of parts machining and welding;
• Good French, spoken and written, and functional English.
Location: LaSalle.
Salary: $55K to $65K depending on experience + fringe benefits.

Assembler/Welder (TIG/MIG) - ref.21247SB

Our client is a designer and manufacturer of custom automated machines.
• Ensure mechanical fabrication of projects under the management of the engineering team;
• Read and interpret welding drawings or instructions;
• Use manual or semi-automatic apparatus for welding metal parts such as gas-tungsten (GTAW) arc welding machines with solid wire (GMAW);
• Respect deadlines and delivery schedules;
• Provide assistance to teams on other projects;
• Complete and sign inspection forms;
• Identify and document problems;
• Provide remaining time estimates on work in progress when requested;
• Participate actively in meetings related to project fabrication.
Requirements:
• DEP in Welding/Assembly;
• At least 5 years experience in a similar manufacturing environment;
• Basic knowledge in mechanics, plumbing, hydraulic systems, pneumatic systems and industrial knowledge;
• Overhead crane operation and SIMDUT cards are an asset;
• Fluent French (spoken and written).
Location: Montreal.
Salary: $37K to $50K depending on experience + fringe benefits.

TIG Assembler/Welder - ref.21217IG

Our client, a growing manufacturer of automated packaging equipment is seeking 2 TIG Welder-Assemblers for the evening shift and day shift.
• TIG welding and assembly of stainless steel parts according to drawings and specifications provided by supervisor;
• Polish welds and parts to a Ra32 sanitary finish;
• Repair and maintain tools supplied;
• Install covers, switches, wires, etc. for final assembly of units;
• Prepare and clean product prior to crating
• Assist in crating finished product.
Requirements:
• DEP in Welding, or equivalent;
• 3 to 5 years experience TIG welding in sanitary industry,
• Excellent ability to read Autocad drawings and assemble complex assemblies;
• Ability to lift 50 to 75 pounds;
• English and French.
• 40 hours per week over 4 days (Monday to Thursday, evening shift 3 pm to 1 am).
Location: Ville St-Laurent.
Salary: $37K to $46K depending on experience + fringe benefits.

Heavy Equipment Mechanic - ref.21186KL

Our client is looking for Heavy Equipment Mechanics. You will be responsible for preventive maintenance, maintenance and repair of trucks and trailers.
• Inspect, diagnose, repair and maintain mechanical, electrical, hydraulic and electronic systems and components.
Requirements:
• DEP in Truck and Trailer Mechanics;
• 3 years pertinent experience with trailers or heavy equipment;
• Fluent French.
Status: Evening position from Monday to Thursday, 1500h to 1h30, 40h/week. Weekend position Friday, Saturday and Sunday from 06h00 to 18h00, 36 h/week (paid for 40h).
Location: LaSalle.
Salary: $22 to $30/hour depending on experience + fringe benefits.

Electromechanic (Night Shift) - ref.21193SB

Our client, a leader in the North American food industry, is looking for an Electromechanic.
• Verify, repair and maintain all production machinery and other mechanical and electrical equipment;
• Ensure that the electrical work of the plant is compliant;
• Technical support to production and other departments;
• Troubleshoot failures and correct;
• Perform fault analysis;
• Conduct preventive maintenance;
• Participate in the design and implementation of new projects.
Requirements:
• DEC or DEP in Industrial Maintenance, or equivalent training;
• 2 to 3 years experience in industrial maintenance mechanics preferably in the food sector;
• Excellent knowledge of welding, pneumatics and hydraulics;
• Knowledge of electric motors, controls and instrumentation;
• Knowledge of logical circuits and industrial instrumentation (calibration, RTD, PT, etc.);
• Possessing a C license or being in the process of obtaining one is a strong asset;
• Ability to follow instruction manuals, schemas and circuit diagrams;
• French.
Location: Ville St-Laurent.
Salary: $28+/hour + shift bonus + fringe benefits.

Electromechanic (Night Shift) - ref.21190IG

Our customer, very well established in the food industry, is looking to add Electromechanics on their night shift.
• Mechanical, electrical and electronic troubleshooting of automated and non-automated production equipment;
• Preventive maintenance of equipment;
• Participate in the resolution of problems and in continuous improvement;
• Test equipment to ensure performance;
• Participate in the implementation and start-up of new equipment;
• Respect HACCP rules.
Requirements:
• DEP in Electromechanics;
• A least 2 years experience in a similar position;
• Good electrical skills and resourcefulness;
• Possess own tool box (annual allowance for the purchase of new tools).
Status: Night rotation 3, 2, 2.
Location: South Shore.
Salary: $50K to $60K depending on experience + fringe benefits.

Over 35,000 CVs of experienced technical staff on file including engineers, software developers, analysts, drafters, managers, technical writers, planners, designers, technologists, buyers, technicians and tradespersons, as well as senior management.

© Techaid Inc.
5165 Queen Mary Road, #401
Montreal (QC) H3W 1X7
Tel: 514-482-6790